2010 Cadillac SRX Oil capacity
Depends on your engine. Choose yours, or compare them here.
- 2.8L V6 Engine 6.0 qt with filter
- 3.0L V6 Engine 6.0 qt with filter
6.0qt
With filter · 2.8L V6 Engine
6.0qt
With filter · 3.0L V6 Engine
2010 Cadillac SRX Owner's Manual, PDF page 436
6.0 qtOpen the manual at this page ↗Added Oct 17, 2026 · Updated
See where it's printed
Oil capacity (with filter) · 2.8L V6 Engine · PDF page 436
6.0 qt
Oil capacity (with filter) · 3.0L V6 Engine · PDF page 436
6.0 qt
2010 Cadillac SRX Owner's Manual, PDF page 436
6.0 qtOpen the manual at this page ↗Added Oct 17, 2026 · Updated
See where it's printed
Oil capacity (with filter) · 2.8L V6 Engine · PDF page 436
6.0 qt
2010 Cadillac SRX Owner's Manual, PDF page 436
6.0 qtOpen the manual at this page ↗Added Oct 17, 2026 · Updated
See where it's printed
Oil capacity (with filter) · 3.0L V6 Engine · PDF page 436
6.0 qt
See every quote (2 values)
All versions
| Applies to | Value | Manual says | Page |
|---|---|---|---|
| 2.8L V6 Engine | 6.0 qtwith filter | “6.0 qt” | PDF page 436 ↗ |
| 3.0L V6 Engine | 6.0 qtwith filter | “6.0 qt” | PDF page 436 ↗ |
Scroll the table to see the quote and page →
Check the level before you drive
- Park on level ground. Turn off the engine and follow the waiting period in your owner's manual.
- Pull, wipe, and reinsert the dipstick. Use a clean cloth, then push the dipstick all the way back in.
- Read the level between the marks. Pull it out again. The oil should sit between the upper and lower marks.
- Top up a little at a time, then recheck. Use the specified oil. Don't fill above the upper mark.
A quick level check, not a full oil-change guide. Follow your manual's procedure.
Confirm with your own manual, dipstick or door-jamb label.
Report a problem with this page →