CAR SPEC SHEET

2020 Ford Transit Oil capacity

Change year

Depends on your engine. Choose yours, or compare them here.

  • 2.0L EcoBlue, all 3.0 gal (11.5 L) with filter
  • 3.5L Duratec, all 6.0 qt (5.7 L) with filter
  • 3.5L Ecoboost™, all 6.0 qt (5.7 L) with filter

2020 Ford Transit Owner's Manual, PDF pages 374, 379 and 385

3.0 gal (11.5 L)Open the manual at this page ↗Added Oct 16, 2026
See where it's printed

Oil capacity (with filter) · 2.0L EcoBlue, all · PDF page 374

3.0 gal (11.5 L)

Oil capacity (with filter) · 3.5L Duratec, all · PDF page 379

6.0 qt (5.7 L)

Oil capacity (with filter) · 3.5L Ecoboost™, all · PDF page 385

6.0 qt (5.7 L)

See every quote (3 values)

All versions

3 values
Applies toValueManual saysPage
2.0L EcoBlue, all 3.0 gal (11.5 L)with filter “3.0 gal (11.5 L)” PDF page 374 ↗
3.5L Duratec, all 6.0 qt (5.7 L)with filter “6.0 qt (5.7 L)” PDF page 379 ↗
3.5L Ecoboost™, all 6.0 qt (5.7 L)with filter “6.0 qt (5.7 L)” PDF page 385 ↗

Scroll the table to see the quote and page →

Check the level before you drive

  1. Park on level ground. Turn off the engine and follow the waiting period in your owner's manual.
  2. Pull, wipe, and reinsert the dipstick. Use a clean cloth, then push the dipstick all the way back in.
  3. Read the level between the marks. Pull it out again. The oil should sit between the upper and lower marks.
  4. Top up a little at a time, then recheck. Use the specified oil. Don't fill above the upper mark.

A quick level check, not a full oil-change guide. Follow your manual's procedure.

Confirm with your own manual, dipstick or door-jamb label.
Report a problem with this page →