CAR SPEC SHEET

2013 Chevrolet Corvette Oil capacity

Change year

Depends on your engine. Choose yours, or compare them here.

  • 6.2L LS3 V8 6.0 qt with filter
  • 6.2L LS3 V8 with Z52 Dry Sump Oil System 10.5 qt with filter
  • 6.2L LS9 V8 Supercharged 10.5 qt with filter
  • 7.0L LS7 V8 10.5 qt with filter

2013 Chevrolet Corvette Owner's Manual, PDF pages 370 and 371

6.0 qtOpen the manual at this page ↗Added Oct 17, 2026
See where it's printed

Oil capacity (with filter) · 6.2L LS3 V8 · PDF page 370

6.0 qt

Oil capacity (with filter) · 6.2L LS3 V8 with Z52 Dry Sump Oil System · PDF page 371

10.5 qt

Oil capacity (with filter) · 6.2L LS9 V8 Supercharged · PDF page 371

10.5 qt

Oil capacity (with filter) · 7.0L LS7 V8 · PDF page 371

10.5 qt

See every quote (4 values)

All versions

4 values
Applies toValueManual saysPage
6.2L LS3 V8 6.0 qtwith filter “6.0 qt” PDF page 370 ↗
6.2L LS3 V8 with Z52 Dry Sump Oil System 10.5 qtwith filter “10.5 qt” PDF page 371 ↗
6.2L LS9 V8 Supercharged 10.5 qtwith filter “10.5 qt” PDF page 371 ↗
7.0L LS7 V8 10.5 qtwith filter “10.5 qt” PDF page 371 ↗

Scroll the table to see the quote and page →

Check the level before you drive

  1. Park on level ground. Turn off the engine and follow the waiting period in your owner's manual.
  2. Pull, wipe, and reinsert the dipstick. Use a clean cloth, then push the dipstick all the way back in.
  3. Read the level between the marks. Pull it out again. The oil should sit between the upper and lower marks.
  4. Top up a little at a time, then recheck. Use the specified oil. Don't fill above the upper mark.

A quick level check, not a full oil-change guide. Follow your manual's procedure.

Confirm with your own manual, dipstick or door-jamb label.
Report a problem with this page →