2016 Ford Fusion Hybrid Lug nut torque
Depends on your version. Choose yours, or compare them here.
- M12 x 1.5 bolt size 100 lb-ft
- M14 x 1.5 bolt size 150 lb-ft
100lb-ft
M12 x 1.5 bolt size
150lb-ft
M14 x 1.5 bolt size
2016 Ford Fusion Hybrid Owner's Manual, PDF page 315
100 (135) M12 x 1.5Open the manual at this page ↗Added Oct 16, 2026 · Updated
See where it's printed
Lug nut torque · M12 x 1.5 bolt size · PDF page 315
100 (135) M12 x 1.5
Lug nut torque · M14 x 1.5 bolt size · PDF page 315
150 (204) M14 x 1.5
2016 Ford Fusion Hybrid Owner's Manual, PDF page 315
100 (135) M12 x 1.5Open the manual at this page ↗Added Oct 16, 2026 · Updated
See where it's printed
Lug nut torque · M12 x 1.5 bolt size · PDF page 315
100 (135) M12 x 1.5
2016 Ford Fusion Hybrid Owner's Manual, PDF page 315
150 (204) M14 x 1.5Open the manual at this page ↗Added Oct 16, 2026 · Updated
See where it's printed
Lug nut torque · M14 x 1.5 bolt size · PDF page 315
150 (204) M14 x 1.5
See every quote (2 values)
All versions
| Applies to | Value | Manual says | Page |
|---|---|---|---|
| M12 x 1.5 bolt size | 100 lb-ft | “100 (135) M12 x 1.5” | PDF page 315 ↗ |
| M14 x 1.5 bolt size | 150 lb-ft | “150 (204) M14 x 1.5” | PDF page 315 ↗ |
Scroll the table to see the quote and page →
Tightening wheel nuts
- Snug every nut by hand first. With the wheel still lifted, thread each nut on evenly.
- Lower the car and torque in a star pattern. Use a torque wrench set to the value above, working across the wheel.
- Recheck after a short drive. Your manual may give a re-torque interval.
Impact guns can over-tighten nuts. Finish with a torque wrench.
Confirm with your own manual, dipstick or door-jamb label.
Report a problem with this page →