2021 Ford Bronco Lug nut torque
100lb-ft
all (M12 X 1.5)
2021 Ford Bronco Owner's Manual, PDF page 396
100 lb.ft (135 Nm)Open the manual at this page ↗Added Oct 16, 2026 · Updated
See where it's printed
Lug nut torque · All (M12 X 1.5) · PDF page 396
100 lb.ft (135 Nm)
See every quote (1 value)
As printed in the manual
| Applies to | Value | Manual says | Page |
|---|---|---|---|
| All (M12 X 1.5) | 100 lb-ft | “100 lb.ft (135 Nm)” | PDF page 396 ↗ |
Scroll the table to see the quote and page →
Tightening wheel nuts
- Snug every nut by hand first. With the wheel still lifted, thread each nut on evenly.
- Lower the car and torque in a star pattern. Use a torque wrench set to the value above, working across the wheel.
- Recheck after a short drive. Your manual may give a re-torque interval.
Impact guns can over-tighten nuts. Finish with a torque wrench.
Confirm with your own manual, dipstick or door-jamb label.
Report a problem with this page →