2010 Honda Civic Sedan Oil capacity
Depends on your engine. Choose yours, or compare them here.
- Except Si 3.9 US qt with filter
- Si 4.6 US qt with filter
3.9US qt
With filter · Except Si
4.6US qt
With filter · Si
2010 Honda Civic Sedan Owner's Manual, PDF page 296
3.9 US qt (3.7 )Open the manual at this page ↗Added Oct 16, 2026
See where it's printed
Oil capacity (with filter) · Except Si · PDF page 296
3.9 US qt (3.7 )
Oil capacity (with filter) · Si · PDF page 296
4.6 US qt (4.4 )
2010 Honda Civic Sedan Owner's Manual, PDF page 296
3.9 US qt (3.7 )Open the manual at this page ↗Added Oct 16, 2026
See where it's printed
Oil capacity (with filter) · Except Si · PDF page 296
3.9 US qt (3.7 )
2010 Honda Civic Sedan Owner's Manual, PDF page 296
4.6 US qt (4.4 )Open the manual at this page ↗Added Oct 16, 2026
See where it's printed
Oil capacity (with filter) · Si · PDF page 296
4.6 US qt (4.4 )
See every quote (2 values)
All versions
| Applies to | Value | Manual says | Page |
|---|---|---|---|
| Except Si | 3.9 US qtwith filter | “3.9 US qt (3.7 )” | PDF page 296 ↗ |
| Si | 4.6 US qtwith filter | “4.6 US qt (4.4 )” | PDF page 296 ↗ |
Scroll the table to see the quote and page →
Matches the spec above
Matches the spec above
Search links. Check the listing matches your version.
Check the level before you drive
- Park on level ground. Turn off the engine and follow the waiting period in your owner's manual.
- Pull, wipe, and reinsert the dipstick. Use a clean cloth, then push the dipstick all the way back in.
- Read the level between the marks. Pull it out again. The oil should sit between the upper and lower marks.
- Top up a little at a time, then recheck. Use the specified oil. Don't fill above the upper mark.
A quick level check, not a full oil-change guide. Follow your manual's procedure.
Confirm with your own manual, dipstick or door-jamb label.
Report a problem with this page →