How to Reset the Tire Pressure Light (TPMS) on a Chevrolet Captiva Sport

1. Set the parking brake and turn the ignition to ON/RUN with the engine off.
2. Press and hold the RKE transmitter's Q and K buttons together for about three seconds until the horn sounds twice.
3. At the driver side front tire, hold the relearn tool against the sidewall near the valve stem and press its button until the horn chirps.
4. Repeat at the passenger side front, passenger side rear, then driver side rear tire as each turn signal lamp comes on.
5. After the horn sounds twice, turn the ignition to LOCK/OFF.
6. Set all four tires to the pressure on the Tire and Loading Information label.

• You have two minutes for the first tire and five minutes overall, or the process stops and must be restarted.
• A TPMS relearn tool is needed; see your dealer or GM tools to obtain one.
• Do this after rotating tires or replacing a sensor.

Source: 2015 Chevrolet Captiva Sport owner's manual, PDF pages 280, 281. Steps are summarized in our own words (AI-assisted, checked against the cited pages 2026-10-18). Other model years can differ; your manual has the final word.