How to Reset the Tire Pressure Light (TPMS) on a Ford Transit Connect

1. Drive above 20 mph (32 km/h) for at least two minutes, then park where you can reach all four tires.
2. Switch the ignition off, then on with the engine off.
3. Turn the hazard flashers on then off three times within 10 seconds; the horn chirps once and the system indicator flashes.
4. Remove the valve cap on the left front tire and decrease the air pressure until the horn chirps.
5. Repeat on the right front, right rear, then left rear tire, waiting for a chirp at each.
6. Switch the ignition off, then set all four tires to the correct pressure.

• Do this after every tire rotation, and after tire replacement only when the sensor stays the same.
• Do not wait more than two minutes between tires, or the procedure must be repeated on all four wheels.
• A double horn chirp means the reset failed and must be repeated.

Source: 2018 Ford Transit Connect owner's manual, PDF pages 250, 251. Steps are summarized in our own words (AI-assisted, checked against the cited pages 2026-10-18). Other model years can differ; your manual has the final word.