How to Reset the Tire Pressure Light (TPMS) on a Lincoln Continental

1. Drive above 20 mph (32 km/h) for at least two minutes, then park where you can reach all four tires and an air pump.
2. Turn the ignition off with the key in the ignition, then cycle it to on with the engine off.
3. Turn the hazard flashers on then off three times within 10 seconds; the horn sounds once and the system indicator flashes.
4. Remove the valve cap on the left front tire and decrease the air pressure until the horn sounds.
5. Repeat on the right front, right rear, then left rear tire, waiting for the horn each time.
6. Turn the ignition off, then set all four tires to the recommended air pressure.

• Perform the reset after each tire rotation.
• Do not wait more than two minutes between tire sensors or the system can time out.
• A double horn or two short beeps at ignition off means the reset failed and must be repeated.

Source: 2019 Lincoln Continental owner's manual, PDF pages 365, 366. Steps are summarized in our own words (AI-assisted, checked against the cited pages 2026-10-18). Other model years can differ; your manual has the final word.