How to Jump Start a Nissan Armada

1. If using another vehicle, park the two vehicles so their batteries are close, without letting the vehicles touch.
2. Apply the parking brake, select P (Park), and switch off unnecessary electrical systems such as lights, heater and air conditioner.
3. Place the ignition switch to the OFF position.
4. Connect the jumper cables in the sequence shown in the illustration, positive (+) to positive (+) and negative (−) to body ground.
5. Start the booster vehicle's engine and let it run for a few minutes.
6. Hold the booster vehicle at about 2,000 rpm, then start the engine of the vehicle being jump started.

• Connect negative (−) to body ground, not to the battery.
• Do not run the starter more than 10 seconds; if the engine does not start, turn the ignition OFF and wait 10 seconds before retrying.
• If the engine will not start, wait more than 3 minutes with the door closed, avoiding operations like navigation, audio or door lock, then restart.

Source: 2026 Nissan Armada owner's manual, PDF page 530. Steps are summarized in our own words (AI-assisted, checked against the cited pages 2026-10-18). Other model years can differ; your manual has the final word.