2016 Acura RLX Lug nut torque
94lb-ft
2016 Acura RLX Owner's Manual, PDF page 512
94 lbf∙ft (127 N∙m, 13 kgf∙m)Open the manual at this page ↗Added Oct 16, 2026 · Updated
See where it's printed
Lug nut torque · All versions · PDF page 512
94 lbf∙ft (127 N∙m, 13 kgf∙m)
See every quote (1 value)
As printed in the manual
| Applies to | Value | Manual says | Page |
|---|---|---|---|
| All versions | 94 lb-ft | “94 lbf∙ft (127 N∙m, 13 kgf∙m)” | PDF page 512 ↗ |
Scroll the table to see the quote and page →
Tools for this job
Tool for this jobTorque wrench (1/2-inch drive)
Shop on Amazon Set it to 94 lb-ft (from the manual)
Search links. Check the listing matches your vehicle and version. As an Amazon Associate we earn from qualifying purchases.
Tightening wheel nuts
- Snug every nut by hand first. With the wheel still lifted, thread each nut on evenly.
- Lower the car and torque in a star pattern. Use a torque wrench set to the value above, working across the wheel.
- Recheck after a short drive. Your manual may give a re-torque interval.
Impact guns can over-tighten nuts. Finish with a torque wrench.
Confirm with your own manual, dipstick or door-jamb label.
Report a problem with this page →