2009 GMC Yukon and Yukon XL Oil Capacity
2009 GMC Yukon and Yukon XL oil capacity: 6.0 qt with a filter change. Oil type: 5W-30. From the owner's manual, PDF page 521.
6.0qt
With filter
2009 GMC Yukon and Yukon XL Owner's Manual, PDF page 521
Engine Oil with Filter 6.0 qt†Open the manual at this page ↗Added Oct 21, 2026 · Updated
See where it's printed
Oil capacity (with filter) · All versions · PDF page 521
Engine Oil with Filter 6.0 qt†
Oil type SAE 5W-30 Details →
See every quote (1 value)
As printed in the manual
| Applies to | Value | Manual says | Page |
|---|---|---|---|
| All versions | 6.0 qtwith filter | “Engine Oil with Filter 6.0 qt†” | PDF page 521 ↗ |
Scroll the table to see the quote and page →
Check the level before you drive
- Park on level ground. Turn off the engine and follow the waiting period in your owner's manual.
- Pull, wipe, and reinsert the dipstick. Use a clean cloth, then push the dipstick all the way back in.
- Read the level between the marks. Pull it out again. The oil should sit between the upper and lower marks.
- Top up a little at a time, then recheck. Use the specified oil. Don't fill above the upper mark.
A quick level check, not a full oil-change guide. Follow your manual's procedure.
Confirm with your own manual, dipstick or door-jamb label.
Report a problem with this page →