CAR SPEC SHEET

2009 GMC Envoy and Envoy Denali Oil Capacity

2009 GMC Envoy and Envoy Denali oil capacity: 7.0 qt (4.2L L6) or 6.0 qt (5.3L V8) with filter. Oil type: 5W-30. From the owner's manual, PDF page 422.

Change year

Depends on your engine. Choose yours, or compare them here.

  • 4.2L L6 7.0 qt with filter
  • 5.3L V8 6.0 qt with filter

2009 GMC Envoy and Envoy Denali Owner's Manual, PDF page 422

4.2L L6 7.0 qt 6.6 LOpen the manual at this page ↗Added Oct 21, 2026 · Updated
See where it's printed

Oil capacity (with filter) · 4.2L L6 · PDF page 422

4.2L L6 7.0 qt 6.6 L

Oil capacity (with filter) · 5.3L V8 · PDF page 422

5.3L V8 6.0 qt 5.7 L

Oil type SAE 5W-30 Details →

See every quote (2 values)

All versions

2 values
Applies toValueManual saysPage
4.2L L6 7.0 qtwith filter “4.2L L6 7.0 qt 6.6 L” PDF page 422 ↗
5.3L V8 6.0 qtwith filter “5.3L V8 6.0 qt 5.7 L” PDF page 422 ↗

Scroll the table to see the quote and page →

Check the level before you drive

  1. Park on level ground. Turn off the engine and follow the waiting period in your owner's manual.
  2. Pull, wipe, and reinsert the dipstick. Use a clean cloth, then push the dipstick all the way back in.
  3. Read the level between the marks. Pull it out again. The oil should sit between the upper and lower marks.
  4. Top up a little at a time, then recheck. Use the specified oil. Don't fill above the upper mark.

A quick level check, not a full oil-change guide. Follow your manual's procedure.

Confirm with your own manual, dipstick or door-jamb label.
Report a problem with this page →