2016 Lexus ES Oil Capacity
2016 Lexus ES oil capacity: 6.4 qt with a filter change (3.5L 6-cylinder (2GR-FE)). Oil type: 0W-20. From the owner's manual, PDF page 514.
6.4qt
With filter · 3.5L 6-cylinder (2GR-FE)
- Without filter6.0 qt
2016 Lexus ES Owner's Manual, PDF page 514
6.4 qt. (6.1 L, 5.4 Imp.qt.)Open the manual at this page ↗Added Oct 24, 2026
See where it's printed
Oil capacity (with filter) · 3.5L 6-cylinder (2GR-FE) · PDF page 514
6.4 qt. (6.1 L, 5.4 Imp.qt.)
Oil capacity (without filter) · 3.5L 6-cylinder (2GR-FE) · PDF page 514
6.0 qt. (5.7 L, 5.0 Imp.qt.)
Oil type SAE 0W-20 Details →
See every quote (2 values)
As printed in the manual
| Applies to | Value | Manual says | Page |
|---|---|---|---|
| 3.5L 6-cylinder (2GR-FE) | 6.4 qtwith filter | “6.4 qt. (6.1 L, 5.4 Imp.qt.)” | PDF page 514 ↗ |
| 3.5L 6-cylinder (2GR-FE) | 6.0 qtwithout filter | “6.0 qt. (5.7 L, 5.0 Imp.qt.)” | PDF page 514 ↗ |
Scroll the table to see the quote and page →
Check the level before you drive
- Park on level ground. Turn off the engine and follow the waiting period in your owner's manual.
- Pull, wipe, and reinsert the dipstick. Use a clean cloth, then push the dipstick all the way back in.
- Read the level between the marks. Pull it out again. The oil should sit between the upper and lower marks.
- Top up a little at a time, then recheck. Use the specified oil. Don't fill above the upper mark.
A quick level check, not a full oil-change guide. Follow your manual's procedure.
Confirm with your own manual, dipstick or door-jamb label.
Report a problem with this page →