2012 Toyota Corolla Oil Capacity
2012 Toyota Corolla oil capacity: 4.4 qt (1.8 L 4-cylinder (2ZR-FE) engine) or 4.0 qt (2.4 L 4-cylinder (2AZ-FE) engine) with filter.
Depends on your engine. Choose yours, or compare them here.
- 1.8 L 4-cylinder (2ZR-FE) engine 4.4 qt with filter·4.1 qt without filter
- 2.4 L 4-cylinder (2AZ-FE) engine 4.0 qt with filter·3.8 qt without filter
4.4qt
With filter · 1.8 L 4-cylinder (2ZR-FE) engine
- Without filter4.1 qt
4.0qt
With filter · 2.4 L 4-cylinder (2AZ-FE) engine
- Without filter3.8 qt
2012 Toyota Corolla Owner's Manual, PDF page 468
4.4 qt. (4.2 L, 3.7 Imp. qt.)Open the manual at this page ↗Added Oct 22, 2026 · Updated
See where it's printed
Oil capacity (with filter) · 1.8 L 4-cylinder (2ZR-FE) engine · PDF page 468
4.4 qt. (4.2 L, 3.7 Imp. qt.)
Oil capacity (without filter) · 1.8 L 4-cylinder (2ZR-FE) engine · PDF page 468
4.1 qt. (3.9 L, 3.4 Imp. qt.)
Oil capacity (with filter) · 2.4 L 4-cylinder (2AZ-FE) engine · PDF page 468
4.0 qt. (3.8 L, 3.3 Imp. qt.)
Oil capacity (without filter) · 2.4 L 4-cylinder (2AZ-FE) engine · PDF page 468
3.8 qt. (3.6 L, 3.2 Imp. qt.)
2012 Toyota Corolla Owner's Manual, PDF page 468
4.4 qt. (4.2 L, 3.7 Imp. qt.)Open the manual at this page ↗Added Oct 22, 2026 · Updated
See where it's printed
Oil capacity (with filter) · 1.8 L 4-cylinder (2ZR-FE) engine · PDF page 468
4.4 qt. (4.2 L, 3.7 Imp. qt.)
Oil capacity (without filter) · 1.8 L 4-cylinder (2ZR-FE) engine · PDF page 468
4.1 qt. (3.9 L, 3.4 Imp. qt.)
2012 Toyota Corolla Owner's Manual, PDF page 468
4.0 qt. (3.8 L, 3.3 Imp. qt.)Open the manual at this page ↗Added Oct 22, 2026 · Updated
See where it's printed
Oil capacity (with filter) · 2.4 L 4-cylinder (2AZ-FE) engine · PDF page 468
4.0 qt. (3.8 L, 3.3 Imp. qt.)
Oil capacity (without filter) · 2.4 L 4-cylinder (2AZ-FE) engine · PDF page 468
3.8 qt. (3.6 L, 3.2 Imp. qt.)
Oil type SAE 0W-20 / SAE 5W-20 or SAE 0W-20 Which one is yours →
See every quote (4 values)
All versions
| Applies to | Value | Manual says | Page |
|---|---|---|---|
| 1.8 L 4-cylinder (2ZR-FE) engine | 4.4 qtwith filter | “4.4 qt. (4.2 L, 3.7 Imp. qt.)” | PDF page 468 ↗ |
| 1.8 L 4-cylinder (2ZR-FE) engine | 4.1 qtwithout filter | “4.1 qt. (3.9 L, 3.4 Imp. qt.)” | PDF page 468 ↗ |
| 2.4 L 4-cylinder (2AZ-FE) engine | 4.0 qtwith filter | “4.0 qt. (3.8 L, 3.3 Imp. qt.)” | PDF page 468 ↗ |
| 2.4 L 4-cylinder (2AZ-FE) engine | 3.8 qtwithout filter | “3.8 qt. (3.6 L, 3.2 Imp. qt.)” | PDF page 468 ↗ |
Scroll the table to see the quote and page →
Check the level before you drive
- Park on level ground. Turn off the engine and follow the waiting period in your owner's manual.
- Pull, wipe, and reinsert the dipstick. Use a clean cloth, then push the dipstick all the way back in.
- Read the level between the marks. Pull it out again. The oil should sit between the upper and lower marks.
- Top up a little at a time, then recheck. Use the specified oil. Don't fill above the upper mark.
A quick level check, not a full oil-change guide. Follow your manual's procedure.
Confirm with your own manual, dipstick or door-jamb label.
Report a problem with this page →