2021 Toyota Corolla Oil Capacity
2021 Toyota Corolla oil capacity: 4.4 qt (1.8 L 4-cylinder (2ZR-FAE) engine) or 4.9 qt (2.0 L 4-cylinder (M20A-FKS) engine) with filter. Oil type: 0W-20.
Depends on your engine. Choose yours, or compare them here.
- 1.8 L 4-cylinder (2ZR-FAE) engine 4.4 qt with filter·4.1 qt without filter
- 2.0 L 4-cylinder (M20A-FKS) engine 4.9 qt with filter·4.5 qt without filter
4.4qt
With filter · 1.8 L 4-cylinder (2ZR-FAE) engine
- Without filter4.1 qt
4.9qt
With filter · 2.0 L 4-cylinder (M20A-FKS) engine
- Without filter4.5 qt
2021 Toyota Corolla Owner's Manual, PDF pages 558 and 559
4.4 qt. (4.2 L, 3.7 Imp. qt.)Open the manual at this page ↗Added Oct 22, 2026 · Updated
See where it's printed
Oil capacity (with filter) · 1.8 L 4-cylinder (2ZR-FAE) engine · PDF page 558
4.4 qt. (4.2 L, 3.7 Imp. qt.)
Oil capacity (without filter) · 1.8 L 4-cylinder (2ZR-FAE) engine · PDF page 558
4.1 qt. (3.9 L, 3.4 Imp. qt.)
Oil capacity (with filter) · 2.0 L 4-cylinder (M20A-FKS) engine · PDF page 559
4.9 qt. (4.6 L, 4.0 Imp. qt.)
Oil capacity (without filter) · 2.0 L 4-cylinder (M20A-FKS) engine · PDF page 559
4.5 qt. (4.3 L, 3.8 Imp. qt.)
2021 Toyota Corolla Owner's Manual, PDF page 558
4.4 qt. (4.2 L, 3.7 Imp. qt.)Open the manual at this page ↗Added Oct 22, 2026 · Updated
See where it's printed
Oil capacity (with filter) · 1.8 L 4-cylinder (2ZR-FAE) engine · PDF page 558
4.4 qt. (4.2 L, 3.7 Imp. qt.)
Oil capacity (without filter) · 1.8 L 4-cylinder (2ZR-FAE) engine · PDF page 558
4.1 qt. (3.9 L, 3.4 Imp. qt.)
2021 Toyota Corolla Owner's Manual, PDF page 559
4.9 qt. (4.6 L, 4.0 Imp. qt.)Open the manual at this page ↗Added Oct 22, 2026 · Updated
See where it's printed
Oil capacity (with filter) · 2.0 L 4-cylinder (M20A-FKS) engine · PDF page 559
4.9 qt. (4.6 L, 4.0 Imp. qt.)
Oil capacity (without filter) · 2.0 L 4-cylinder (M20A-FKS) engine · PDF page 559
4.5 qt. (4.3 L, 3.8 Imp. qt.)
Oil type SAE 0W-20 Details →
See every quote (4 values)
All versions
| Applies to | Value | Manual says | Page |
|---|---|---|---|
| 1.8 L 4-cylinder (2ZR-FAE) engine | 4.4 qtwith filter | “4.4 qt. (4.2 L, 3.7 Imp. qt.)” | PDF page 558 ↗ |
| 1.8 L 4-cylinder (2ZR-FAE) engine | 4.1 qtwithout filter | “4.1 qt. (3.9 L, 3.4 Imp. qt.)” | PDF page 558 ↗ |
| 2.0 L 4-cylinder (M20A-FKS) engine | 4.9 qtwith filter | “4.9 qt. (4.6 L, 4.0 Imp. qt.)” | PDF page 559 ↗ |
| 2.0 L 4-cylinder (M20A-FKS) engine | 4.5 qtwithout filter | “4.5 qt. (4.3 L, 3.8 Imp. qt.)” | PDF page 559 ↗ |
Scroll the table to see the quote and page →
Check the level before you drive
- Park on level ground. Turn off the engine and follow the waiting period in your owner's manual.
- Pull, wipe, and reinsert the dipstick. Use a clean cloth, then push the dipstick all the way back in.
- Read the level between the marks. Pull it out again. The oil should sit between the upper and lower marks.
- Top up a little at a time, then recheck. Use the specified oil. Don't fill above the upper mark.
A quick level check, not a full oil-change guide. Follow your manual's procedure.
Confirm with your own manual, dipstick or door-jamb label.
Report a problem with this page →