2020 Toyota RAV4 Oil Capacity
2020 Toyota RAV4 oil capacity: 4.8 qt with a filter change (A25A-FKS). Oil type: 0W-16. From the owner's manual, PDF page 666.
4.8qt
With filter · A25A-FKS
- Without filter4.4 qt
2020 Toyota RAV4 Owner's Manual, PDF page 666
4.8 qt. (4.5 L, 4.0 Imp. qt.)Open the manual at this page ↗Added Oct 22, 2026 · Updated
See where it's printed
Oil capacity (with filter) · A25A-FKS · PDF page 666
4.8 qt. (4.5 L, 4.0 Imp. qt.)
Oil capacity (without filter) · A25A-FKS · PDF page 666
4.4 qt. (4.2 L, 3.7 Imp. qt.)
Oil type SAE 0W-16 Details →
See every quote (2 values)
As printed in the manual
| Applies to | Value | Manual says | Page |
|---|---|---|---|
| A25A-FKS | 4.8 qtwith filter | “4.8 qt. (4.5 L, 4.0 Imp. qt.)” | PDF page 666 ↗ |
| A25A-FKS | 4.4 qtwithout filter | “4.4 qt. (4.2 L, 3.7 Imp. qt.)” | PDF page 666 ↗ |
Scroll the table to see the quote and page →
Check the level before you drive
- Park on level ground. Turn off the engine and follow the waiting period in your owner's manual.
- Pull, wipe, and reinsert the dipstick. Use a clean cloth, then push the dipstick all the way back in.
- Read the level between the marks. Pull it out again. The oil should sit between the upper and lower marks.
- Top up a little at a time, then recheck. Use the specified oil. Don't fill above the upper mark.
A quick level check, not a full oil-change guide. Follow your manual's procedure.
Confirm with your own manual, dipstick or door-jamb label.
Report a problem with this page →