2019 Toyota Prius Prime Oil Capacity
2019 Toyota Prius Prime oil capacity: 4.4 qt with a filter change. Oil type: 0W-20. From the owner's manual, PDF page 720.
4.4qt
With filter
- Without filter4.1 qt
2019 Toyota Prius Prime Owner's Manual, PDF page 720
4.4 qt. (4.2 L, 3.7 Imp.qt.)Open the manual at this page ↗Added Oct 24, 2026 · Updated
See where it's printed
Oil capacity (with filter) · All versions · PDF page 720
4.4 qt. (4.2 L, 3.7 Imp.qt.)
Oil capacity (without filter) · All versions · PDF page 720
4.1 qt. (3.9 L, 3.4 Imp.qt.)
Oil type 0W-20 Details →
See every quote (2 values)
As printed in the manual
| Applies to | Value | Manual says | Page |
|---|---|---|---|
| All versions | 4.4 qtwith filter | “4.4 qt. (4.2 L, 3.7 Imp.qt.)” | PDF page 720 ↗ |
| All versions | 4.1 qtwithout filter | “4.1 qt. (3.9 L, 3.4 Imp.qt.)” | PDF page 720 ↗ |
Scroll the table to see the quote and page →
Get the right part
Matches your manual0W-20 full synthetic motor oil
Shop on Amazon Matches your manualToyota 0W-20 motor oil
Shop on Amazon Search links. Check the listing matches your vehicle and version. As an Amazon Associate we earn from qualifying purchases.
Check the level before you drive
- Park on level ground. Turn off the engine and follow the waiting period in your owner's manual.
- Pull, wipe, and reinsert the dipstick. Use a clean cloth, then push the dipstick all the way back in.
- Read the level between the marks. Pull it out again. The oil should sit between the upper and lower marks.
- Top up a little at a time, then recheck. Use the specified oil. Don't fill above the upper mark.
A quick level check, not a full oil-change guide. Follow your manual's procedure.
Confirm with your own manual, dipstick or door-jamb label.
Report a problem with this page →