CAR SPEC SHEET

2010 Buick Lucerne Oil capacity

Change year

Depends on your engine. Choose yours, or compare them here.

  • 3.9L V6 Engine 4.0 qt with filter
  • 4.6L V8 Engine 7.4 qt with filter

2010 Buick Lucerne Owner's Manual, PDF page 420

Engine Oil with Filter 3.9LV6 Engine 4.0 qtOpen the manual at this page ↗Added Oct 17, 2026 · Updated
See where it's printed

Oil capacity (with filter) · 3.9L V6 Engine · PDF page 420

Engine Oil with Filter 3.9LV6 Engine 4.0 qt

Oil capacity (with filter) · 4.6L V8 Engine · PDF page 420

4.6LV8 Engine 7.4 qt

See every quote (2 values)

All versions

2 values
Applies toValueManual saysPage
3.9L V6 Engine 4.0 qtwith filter “Engine Oil with Filter 3.9LV6 Engine 4.0 qt” PDF page 420 ↗
4.6L V8 Engine 7.4 qtwith filter “4.6LV8 Engine 7.4 qt” PDF page 420 ↗

Scroll the table to see the quote and page →

Check the level before you drive

  1. Park on level ground. Turn off the engine and follow the waiting period in your owner's manual.
  2. Pull, wipe, and reinsert the dipstick. Use a clean cloth, then push the dipstick all the way back in.
  3. Read the level between the marks. Pull it out again. The oil should sit between the upper and lower marks.
  4. Top up a little at a time, then recheck. Use the specified oil. Don't fill above the upper mark.

A quick level check, not a full oil-change guide. Follow your manual's procedure.

Confirm with your own manual, dipstick or door-jamb label.
Report a problem with this page →