How to Reset the Tire Pressure Light (TPMS) on a Buick Verano

1. Set the parking brake and turn the ignition to ON/RUN with the engine off.
2. Use the MENU button to select the Vehicle Information Menu in the DIC, then scroll with the thumbwheel to the Tire Pressure screen.
3. Press SET/CLR to begin, then press SET/CLR again to confirm; the horn sounds twice and TIRE LEARNING ACTIVE displays.
4. Hold the relearn tool against the driver side front tire sidewall near the valve stem and press its button until the horn chirps.
5. Repeat at the passenger side front, passenger side rear, then driver side rear tire; two horn sounds end the process.
6. Turn the ignition off, then set all four tires to the pressure on the Tire and Loading Information label.

• You have two minutes for the first tire and five minutes overall for all four, or the process stops and must be restarted.
• The malfunction light and DIC message should go off at the next ignition cycle.

Source: 2017 Buick Verano owner's manual, PDF pages 271, 272. Steps are summarized in our own words (AI-assisted, checked against the cited pages 2026-10-18). Other model years can differ; your manual has the final word.