How to Reset the Tire Pressure Light (TPMS) on a Cadillac SRX

Steps from the 2016 Cadillac SRX owner's manual (Vehicles with TPMS; relearn is needed after rotating tires or replacing sensors).

Set the parking brake.
Place the vehicle power mode in ON/RUN/START.
Make sure the Tire Pressure info display option is turned on in the DIC Settings menu.
Use the five-way DIC control on the right side of the steering wheel to scroll to the Tire Pressure screen under the DIC info page.

A TPMS relearn tool is used to match sensors in this order: driver side front, passenger side front, passenger side rear, driver side rear.
You have two minutes for the first position and five minutes overall for all four, or the process stops and must be restarted.
The provided pages end partway through the procedure, so the remaining steps are not shown.

Source: 2016 Cadillac SRX owner's manual, PDF page 291. Steps are summarized in our own words (AI-assisted, checked against the cited pages 2026-10-18). Other model years can differ; your manual has the final word.

Confirm with your own manual, dipstick or door-jamb label.
Report a problem with this page →