How to Reset the Tire Pressure Light (TPMS) on a Chevrolet Cruze

1. Set the parking brake and turn the ignition on without starting the vehicle, or place it in Service Mode.
2. Open the Tire Pressure screen: on an uplevel DIC use the right steering wheel controls, on a base level DIC press MENU and scroll with the thumbwheel.
3. Press and hold V (Set/Reset) on an uplevel DIC, or press SET/CLR on a base level DIC, and confirm if asked.
4. When the horn sounds twice and TIRE LEARNING ACTIVE shows, hold the relearn tool against the driver side front tire sidewall near the valve stem and press its button.
5. After the horn chirp, repeat at the passenger side front, passenger side rear, then driver side rear tires.
6. Turn the vehicle off and set all four tires to the pressure on the Tire and Loading Information label.

• Do this after rotating tires, replacing a TPMS sensor, or swapping a spare for a road tire with a sensor.
• You have two minutes for the first tire and five minutes overall, or the process stops and must be restarted.

Source: 2019 Chevrolet Cruze owner's manual, PDF pages 284, 285. Steps are summarized in our own words (AI-assisted, checked against the cited pages 2026-10-18). Other model years can differ; your manual has the final word.