How to Reset the Tire Pressure Light (TPMS) on a Chevrolet Impala Limited

1. Set the parking brake and turn the ignition to ON/RUN with the engine off.
2. Press the RKE transmitter's lock and unlock buttons together for about five seconds until the horn sounds twice and TIRE LEARNING ACTIVE displays.
3. Hold the relearn tool against the driver side front tire sidewall near the valve stem and press its button until the horn chirps.
4. Repeat at the passenger side front tire, then the passenger side rear tire.
5. Repeat at the driver side rear tire; the horn sounds twice and the TIRE LEARNING ACTIVE message goes off.
6. Turn the ignition to LOCK/OFF, then set all four tires to the pressure on the Tire and Loading Information label.

• Do this after rotating tires or replacing one or more TPMS sensors, or after swapping a spare for a road tire with a sensor.
• You have two minutes for the first tire and five minutes overall, or the process stops and must be restarted.

Source: 2016 Chevrolet Impala Limited owner's manual, PDF pages 240, 241. Steps are summarized in our own words (AI-assisted, checked against the cited pages 2026-10-18). Other model years can differ; your manual has the final word.