How to Jump Start a Chevrolet Malibu Limited

1. Check that the other vehicle has a 12-volt battery with a negative ground system, and park the two vehicles so they do not touch.
2. Set the parking brake on both vehicles, with automatic transmissions in P (Park) and manual transmissions in Neutral.
3. Turn the ignition to LOCK/OFF and switch off all lights and accessories in both vehicles, except hazard flashers if needed.
4. Connect the red positive (+) cable to the remote positive (+) terminal of the discharged battery, then to the positive (+) terminal of the good battery.
5. Connect the black negative (−) cable to the negative (−) terminal of the good battery, then to the engine block or an engine mounting bolt.
6. Start the vehicle with the good battery and let it idle for at least four minutes, then try starting the other vehicle.

• Remove the battery cover first by releasing the two rear clips and lifting it toward the front; the remote positive (+) terminal is under it.
• Remove the cables by reversing the connection sequence exactly, then let the started vehicle idle for several minutes.
• If it will not start after a few tries, it probably needs service.

Source: 2016 Chevrolet Malibu Limited owner's manual, PDF pages 295, 296, 297. Steps are summarized in our own words (AI-assisted, checked against the cited pages 2026-10-18). Other model years can differ; your manual has the final word.