How to Reset the Tire Pressure Light (TPMS) on a Chevrolet Silverado LD and 2500HD/3500HD

1. Set the parking brake and turn the ignition on without starting the vehicle.
2. Scroll to the Tire Pressure screen on the DIC info page, using the DIC controls or the trip odometer reset stem.
3. Press and hold the V (Set/Reset) button, or the trip odometer reset stem for about five seconds, and confirm yes if asked.
4. Wait for two horn sounds and the TIRE LEARNING ACTIVE message, then hold the relearn tool to the driver side front tire sidewall near the valve stem and press its button.
5. After a horn chirp, repeat at the passenger front, passenger rear, then driver rear tire; two horn sounds end the process.
6. Turn the vehicle off and set all four tires to the pressure on the Tire and Loading Information label.

• Needed after rotating tires or replacing TPMS sensors, or swapping a spare for a road tire with a sensor.
• You have two minutes for the first tire and five minutes overall, or the process stops and must be restarted.
• On uplevel DIC, make sure the Tire Pressure info page option is turned on in Settings.

Source: 2019 Chevrolet Silverado LD and 2500HD/3500HD owner's manual, PDF pages 386, 387. Steps are summarized in our own words (AI-assisted, checked against the cited pages 2026-10-18). Other model years can differ; your manual has the final word.