How to Jump Start a Chevrolet Traverse Limited

1. Check that the other vehicle has a 12-volt battery with a negative ground system, and park the two vehicles so they do not touch.
2. Set the parking brake firmly and put the shift lever in P (Park) with an automatic transmission, or Neutral with a manual.
3. Turn the ignition off and turn off all lights and accessories in both vehicles, except hazard flashers if needed.
4. Connect one end of the red positive (+) cable to the discharged battery positive (+) terminal, under its cover.
5. Connect the other end of the red cable to the good battery positive (+) terminal.
6. Connect one end of the black negative (–) cable to the good battery negative (–) terminal.
7. Connect the other black end to the discharged battery negative (–) grounding point.
8. Start the good vehicle and idle it at least four minutes, then try starting the dead vehicle.

• Remove the cables by reversing the connection sequence exactly, then let the started vehicle idle for several minutes.
• If it will not start after a few tries, it probably needs service.
• The discharged battery terminal and grounding point are on the driver side of the vehicle.

Source: 2024 Chevrolet Traverse Limited owner's manual, PDF pages 310, 311. Steps are summarized in our own words (AI-assisted, checked against the cited pages 2026-10-18). Other model years can differ; your manual has the final word.