CAR SPEC SHEET

2008 GMC Savana Oil Capacity

2008 GMC Savana oil capacity: 4.5 qt (4300 V6) or 6.0 qt (4800 V8, 5300 V8, 6000 V8) with filter. From the owner's manual, PDF page 350.

Change year

Depends on your engine. Choose yours, or compare them here.

  • 4300 V6 4.5 qt with filter
  • 4800 V8, 5300 V8, 6000 V8 6.0 qt with filter

2008 GMC Savana Owner's Manual, PDF page 350

4.5 qtOpen the manual at this page ↗Added Oct 21, 2026 · Updated
See where it's printed

Oil capacity (with filter) · 4300 V6 · PDF page 350

4.5 qt

Oil capacity (with filter) · 4800 V8, 5300 V8, 6000 V8 · PDF page 350

6.0 qt

See every quote (2 values)

All versions

2 values
Applies toValueManual saysPage
4300 V6 4.5 qtwith filter “4.5 qt” PDF page 350 ↗
4800 V8, 5300 V8, 6000 V8 6.0 qtwith filter “6.0 qt” PDF page 350 ↗

Scroll the table to see the quote and page →

Tools for this job

Tool for this jobOil drain pan
Shop on Amazon

Search links. Check the listing matches your vehicle and version. As an Amazon Associate we earn from qualifying purchases.

Check the level before you drive

  1. Park on level ground. Turn off the engine and follow the waiting period in your owner's manual.
  2. Pull, wipe, and reinsert the dipstick. Use a clean cloth, then push the dipstick all the way back in.
  3. Read the level between the marks. Pull it out again. The oil should sit between the upper and lower marks.
  4. Top up a little at a time, then recheck. Use the specified oil. Don't fill above the upper mark.

A quick level check, not a full oil-change guide. Follow your manual's procedure.

Confirm with your own manual, dipstick or door-jamb label.
Report a problem with this page →