2026 Hyundai Palisade Lug Nut Torque
2026 Hyundai Palisade lug nut torque: 79-94 lb-ft. From the owner's manual, PDF page 553.
79-94lb-ft
2026 Hyundai Palisade Owner's Manual, PDF page 553
The correct wheel bolt tightening torque is 79-94 lbf.ftOpen the manual at this page ↗Added Oct 16, 2026 · Updated
See where it's printed
Lug nut torque · All versions · PDF page 553
The correct wheel bolt tightening torque is 79-94 lbf.ft
See every quote (1 value)
As printed in the manual
| Applies to | Value | Manual says | Page |
|---|---|---|---|
| All versions | 79-94 lb-ft | “The correct wheel bolt tightening torque is 79-94 lbf.ft” | PDF page 553 ↗ |
Scroll the table to see the quote and page →
Tools for this job
Tool for this jobTorque wrench (1/2-inch drive)
Shop on Amazon Search links. Check the listing matches your vehicle and version. As an Amazon Associate we earn from qualifying purchases.
Tightening wheel nuts
- Snug every nut by hand first. With the wheel still lifted, thread each nut on evenly.
- Lower the car and torque in a star pattern. Use a torque wrench set to the value above, working across the wheel.
- Recheck after a short drive. Your manual may give a re-torque interval.
Impact guns can over-tighten nuts. Finish with a torque wrench.
Confirm with your own manual, dipstick or door-jamb label.
Report a problem with this page →