2026 Hyundai Tucson Lug Nut Torque
2026 Hyundai Tucson lug nut torque: 79-94 lb-ft (All (tire change section)) or 79.6-94.0 lb-ft (All (tire rotation section)).
Depends on your version. Choose yours, or compare them here.
- All (tire change section) 79-94 lb-ft
- All (tire rotation section) 79.6-94.0 lb-ft
79-94lb-ft
all (tire change section)
79.6-94.0lb-ft
all (tire rotation section)
2026 Hyundai Tucson Owner's Manual, PDF pages 396 and 418
79-94 lbf. ft (11-13 kgf.m).Open the manual at this page ↗Added Oct 16, 2026 · Updated
See where it's printed
Lug nut torque · All (tire change section) · PDF page 396
79-94 lbf. ft (11-13 kgf.m).
Lug nut torque · All (tire rotation section) · PDF page 418
torque (proper torque is 79.6-94.0
2026 Hyundai Tucson Owner's Manual, PDF page 396
79-94 lbf. ft (11-13 kgf.m).Open the manual at this page ↗Added Oct 16, 2026 · Updated
See where it's printed
Lug nut torque · All (tire change section) · PDF page 396
79-94 lbf. ft (11-13 kgf.m).
2026 Hyundai Tucson Owner's Manual, PDF page 418
torque (proper torque is 79.6-94.0Open the manual at this page ↗Added Oct 16, 2026 · Updated
See where it's printed
Lug nut torque · All (tire rotation section) · PDF page 418
torque (proper torque is 79.6-94.0
See every quote (2 values)
All versions
| Applies to | Value | Manual says | Page |
|---|---|---|---|
| All (tire change section) | 79-94 lb-ft | “79-94 lbf. ft (11-13 kgf.m).” | PDF page 396 ↗ |
| All (tire rotation section) | 79.6-94.0 lb-ft | “torque (proper torque is 79.6-94.0” | PDF page 418 ↗ |
Scroll the table to see the quote and page →
Tools for this job
Search links. Check the listing matches your vehicle and version. As an Amazon Associate we earn from qualifying purchases.
Tightening wheel nuts
- Snug every nut by hand first. With the wheel still lifted, thread each nut on evenly.
- Lower the car and torque in a star pattern. Use a torque wrench set to the value above, working across the wheel.
- Recheck after a short drive. Your manual may give a re-torque interval.
Impact guns can over-tighten nuts. Finish with a torque wrench.
Confirm with your own manual, dipstick or door-jamb label.
Report a problem with this page →