How to Jump Start a Hyundai Venue

1. Park the vehicles close enough for the cables to reach without touching, and keep clear of fans and moving parts.
2. Turn off all electrical devices, put both vehicles in P (Park), set the parking brakes and turn both vehicles OFF.
3. Attach one jumper cable to the red, positive (+) jumper terminal of your vehicle (1).
4. Attach the other end of that cable to the red, positive (+) battery/jumper terminal of the assisting vehicle (2).
5. Attach the second cable to the black, negative (-) battery/jumper terminal of the assisting vehicle (3).
6. Attach the other end of the second cable to the black, negative (-) chassis ground of your vehicle (4).
7. Start the assisting vehicle, let it run at about 2,000 RPM for a few minutes, then start your vehicle.
8. Remove the cables in exact reverse order: (4), (3), (2), then (1).

• Use only a 12-volt power supply and never try to push-start the vehicle.
• Do not connect the cable to the negative (-) jumper terminal of the discharged battery; a spark could make the battery explode.
• If the vehicle will not start after a few attempts, it probably requires service.

Source: 2026 Hyundai Venue owner's manual, PDF pages 294, 295. Steps are summarized in our own words (AI-assisted, checked against the cited pages 2026-10-18). Other model years can differ; your manual has the final word.