2013 Lexus IS C Oil Capacity
2013 Lexus IS C oil capacity: 6.7 qt with a filter change (IS250C). From the owner's manual, PDF page 556.
6.7qt
With filter · IS250C
- Without filter6.2 qt
2013 Lexus IS C Owner's Manual, PDF page 556
6.7 qt. (6.3 L, 5.5 Imp. qt.)Open the manual at this page ↗Added Oct 23, 2026 · Updated
See where it's printed
Oil capacity (with filter) · IS250C · PDF page 556
6.7 qt. (6.3 L, 5.5 Imp. qt.)
Oil capacity (without filter) · IS250C · PDF page 556
6.2 qt. (5.9 L, 5.2 Imp. qt.)
Oil type SAE 0W-20 / SAE 5W-30 Which one is yours →
See every quote (2 values)
As printed in the manual
| Applies to | Value | Manual says | Page |
|---|---|---|---|
| IS250C | 6.7 qtwith filter | “6.7 qt. (6.3 L, 5.5 Imp. qt.)” | PDF page 556 ↗ |
| IS250C | 6.2 qtwithout filter | “6.2 qt. (5.9 L, 5.2 Imp. qt.)” | PDF page 556 ↗ |
Scroll the table to see the quote and page →
Check the level before you drive
- Park on level ground. Turn off the engine and follow the waiting period in your owner's manual.
- Pull, wipe, and reinsert the dipstick. Use a clean cloth, then push the dipstick all the way back in.
- Read the level between the marks. Pull it out again. The oil should sit between the upper and lower marks.
- Top up a little at a time, then recheck. Use the specified oil. Don't fill above the upper mark.
A quick level check, not a full oil-change guide. Follow your manual's procedure.
Confirm with your own manual, dipstick or door-jamb label.
Report a problem with this page →