2006 Toyota Prius Oil Capacity
2006 Toyota Prius oil capacity: 3.9 US qt with a filter change. From the owner's manual, PDF page 428.
3.9US qt
With filter · converted from 3.7 L
- Without filter3.6 US qt
2006 Toyota Prius Owner's Manual, PDF page 428
3.7 (3.9, 3.3)Open the manual at this page ↗Added Oct 24, 2026 · Updated
See where it's printed
Oil capacity (with filter) · All versions · PDF page 428
3.7 (3.9, 3.3)
Oil capacity (without filter) · All versions · PDF page 428
3.4 (3.6, 3.0)
Oil type SAE 5W−30 Details →
See every quote (2 values)
As printed in the manual
| Applies to | Value | Manual says | Page |
|---|---|---|---|
| All versions | 3.9 US qtwith filter · converted from 3.7 L | “3.7 (3.9, 3.3)” | PDF page 428 ↗ |
| All versions | 3.6 US qtwithout filter · converted from 3.4 L | “3.4 (3.6, 3.0)” | PDF page 428 ↗ |
Scroll the table to see the quote and page →
Check the level before you drive
- Park on level ground. Turn off the engine and follow the waiting period in your owner's manual.
- Pull, wipe, and reinsert the dipstick. Use a clean cloth, then push the dipstick all the way back in.
- Read the level between the marks. Pull it out again. The oil should sit between the upper and lower marks.
- Top up a little at a time, then recheck. Use the specified oil. Don't fill above the upper mark.
A quick level check, not a full oil-change guide. Follow your manual's procedure.
Confirm with your own manual, dipstick or door-jamb label.
Report a problem with this page →