What is the oil capacity of the 2010 Toyota Tacoma?

2.7 L 4-cylinder (2TR-FE) engine: 6.1 qt (with filter); 4.0 L V6 (1GR-FE) engine, 2WD models except PreRunner: 4.8 qt (with filter); 4.0 L V6 (1GR-FE) engine, 4WD models and PreRunner: 5.5 qt (with filter); 2.7 L 4-cylinder (2TR-FE) engine: 5.4 qt (without filter); 4.0 L V6 (1GR-FE) engine, 2WD models except PreRunner: 4.4 qt (without filter); 4.0 L V6 (1GR-FE) engine, 4WD models and PreRunner: 5.2 qt (without filter). Source: 2010 Toyota Tacoma Owner's Manual.

2010 Toyota Tacoma Oil Capacity

2010 Toyota Tacoma oil capacity: 6.1 qt (2.7 L 4-cylinder (2TR-FE) engine) or 4.8 qt (4.0 L V6 (1GR-FE) engine, 2WD models except PreRunner) or 5.5 qt (4.0 L…

Change year

Depends on your engine. Choose yours, or compare them here.

2.7 L 4-cylinder (2TR-FE) engine 6.1 qt with filter·5.4 qt without filter
4.0 L V6 (1GR-FE) engine, 2WD models except PreRunner 4.8 qt with filter·4.4 qt without filter
4.0 L V6 (1GR-FE) engine, 4WD models and PreRunner 5.5 qt with filter·5.2 qt without filter

2010 Toyota Tacoma Owner's Manual, PDF pages 476 and 477

6.1 qt. (5.8 L, 5.1 Imp.qt.)Open the manual at this page ↗Added Oct 22, 2026 · Updated Oct 26, 2026

See where it's printed

Oil capacity (with filter) · 2.7 L 4-cylinder (2TR-FE) engine · PDF page 476
6.1 qt. (5.8 L, 5.1 Imp.qt.)

Oil capacity (without filter) · 2.7 L 4-cylinder (2TR-FE) engine · PDF page 476
5.4 qt. (5.1 L, 4.5 Imp.qt.)

Oil capacity (with filter) · 4.0 L V6 (1GR-FE) engine, 2WD models except PreRunner · PDF page 477
4.8 qt. (4.5 L, 4.0 Imp.qt.)

Oil capacity (without filter) · 4.0 L V6 (1GR-FE) engine, 2WD models except PreRunner · PDF page 477
4.4 qt. (4.2 L, 3.7 Imp.qt.)

Oil capacity (with filter) · 4.0 L V6 (1GR-FE) engine, 4WD models and PreRunner · PDF page 477
5.5 qt. (5.2 L, 4.6 Imp.qt.)

Oil capacity (without filter) · 4.0 L V6 (1GR-FE) engine, 4WD models and PreRunner · PDF page 477
5.2 qt. (4.9 L, 4.3 Imp.qt.)

Oil type SAE 5W-20 or 0W-20 / SAE 5W-30 Which one is yours →

All versions

6 values

Applies to	Value	Manual says	Page
2.7 L 4-cylinder (2TR-FE) engine	6.1 qtwith filter	“6.1 qt. (5.8 L, 5.1 Imp.qt.)”	PDF page 476 ↗
2.7 L 4-cylinder (2TR-FE) engine	5.4 qtwithout filter	“5.4 qt. (5.1 L, 4.5 Imp.qt.)”	PDF page 476 ↗
4.0 L V6 (1GR-FE) engine, 2WD models except PreRunner	4.8 qtwith filter	“4.8 qt. (4.5 L, 4.0 Imp.qt.)”	PDF page 477 ↗
4.0 L V6 (1GR-FE) engine, 2WD models except PreRunner	4.4 qtwithout filter	“4.4 qt. (4.2 L, 3.7 Imp.qt.)”	PDF page 477 ↗
4.0 L V6 (1GR-FE) engine, 4WD models and PreRunner	5.5 qtwith filter	“5.5 qt. (5.2 L, 4.6 Imp.qt.)”	PDF page 477 ↗
4.0 L V6 (1GR-FE) engine, 4WD models and PreRunner	5.2 qtwithout filter	“5.2 qt. (4.9 L, 4.3 Imp.qt.)”	PDF page 477 ↗

Scroll the table to see the quote and page →

Check the level before you drive

Park on level ground. Turn off the engine and follow the waiting period in your owner's manual.
Pull, wipe, and reinsert the dipstick. Use a clean cloth, then push the dipstick all the way back in.
Read the level between the marks. Pull it out again. The oil should sit between the upper and lower marks.
Top up a little at a time, then recheck. Use the specified oil. Don't fill above the upper mark.

A quick level check, not a full oil-change guide. Follow your manual's procedure.

Confirm with your own manual, dipstick or door-jamb label.
Report a problem with this page →

Original sourcePDF pages 476 and 477

2010 Toyota Tacoma Owner's Manual