2013 Lexus IS Oil Capacity
2013 Lexus IS oil capacity: 6.7 qt (IS250 2WD models) or 6.8 qt (IS250 AWD models) with filter. From the owner's manual, PDF page 514.
Depends on your engine. Choose yours, or compare them here.
- IS250 2WD models 6.7 qt with filter·6.2 qt without filter
- IS250 AWD models 6.8 qt with filter·6.3 qt without filter
6.7qt
With filter · IS250 2WD models
- Without filter6.2 qt
6.8qt
With filter · IS250 AWD models
- Without filter6.3 qt
2013 Lexus IS Owner's Manual, PDF page 514
6.7 qt. (6.3 L, 5.5 Imp. qt.)Open the manual at this page ↗Added Oct 23, 2026 · Updated
See where it's printed
Oil capacity (with filter) · IS250 2WD models · PDF page 514
6.7 qt. (6.3 L, 5.5 Imp. qt.)
Oil capacity (without filter) · IS250 2WD models · PDF page 514
6.2 qt. (5.9 L, 5.2 Imp. qt.)
Oil capacity (with filter) · IS250 AWD models · PDF page 514
6.8 qt. (6.4 L, 5.6 Imp. qt.)
Oil capacity (without filter) · IS250 AWD models · PDF page 514
6.3 qt. (6.0 L, 5.3 Imp. qt.)
2013 Lexus IS Owner's Manual, PDF page 514
6.7 qt. (6.3 L, 5.5 Imp. qt.)Open the manual at this page ↗Added Oct 23, 2026 · Updated
See where it's printed
Oil capacity (with filter) · IS250 2WD models · PDF page 514
6.7 qt. (6.3 L, 5.5 Imp. qt.)
Oil capacity (without filter) · IS250 2WD models · PDF page 514
6.2 qt. (5.9 L, 5.2 Imp. qt.)
2013 Lexus IS Owner's Manual, PDF page 514
6.8 qt. (6.4 L, 5.6 Imp. qt.)Open the manual at this page ↗Added Oct 23, 2026 · Updated
See where it's printed
Oil capacity (with filter) · IS250 AWD models · PDF page 514
6.8 qt. (6.4 L, 5.6 Imp. qt.)
Oil capacity (without filter) · IS250 AWD models · PDF page 514
6.3 qt. (6.0 L, 5.3 Imp. qt.)
Oil type SAE 0W-20 / SAE 5W-30 Which one is yours →
See every quote (4 values)
All versions
| Applies to | Value | Manual says | Page |
|---|---|---|---|
| IS250 2WD models | 6.7 qtwith filter | “6.7 qt. (6.3 L, 5.5 Imp. qt.)” | PDF page 514 ↗ |
| IS250 2WD models | 6.2 qtwithout filter | “6.2 qt. (5.9 L, 5.2 Imp. qt.)” | PDF page 514 ↗ |
| IS250 AWD models | 6.8 qtwith filter | “6.8 qt. (6.4 L, 5.6 Imp. qt.)” | PDF page 514 ↗ |
| IS250 AWD models | 6.3 qtwithout filter | “6.3 qt. (6.0 L, 5.3 Imp. qt.)” | PDF page 514 ↗ |
Scroll the table to see the quote and page →
Check the level before you drive
- Park on level ground. Turn off the engine and follow the waiting period in your owner's manual.
- Pull, wipe, and reinsert the dipstick. Use a clean cloth, then push the dipstick all the way back in.
- Read the level between the marks. Pull it out again. The oil should sit between the upper and lower marks.
- Top up a little at a time, then recheck. Use the specified oil. Don't fill above the upper mark.
A quick level check, not a full oil-change guide. Follow your manual's procedure.
Confirm with your own manual, dipstick or door-jamb label.
Report a problem with this page →