CAR SPEC SHEET

2010 Toyota 4Runner Oil Capacity

2010 Toyota 4Runner oil capacity: 6.1 qt (2.7 L 4-cylinder (2TR-FE) engine) or 6.6 qt (4.0 L V6 (1GR-FE) engine) with filter. Oil type: 0W-20.

Change year

Depends on your engine. Choose yours, or compare them here.

  • 2.7 L 4-cylinder (2TR-FE) engine 6.1 qt with filter·5.4 qt without filter
  • 4.0 L V6 (1GR-FE) engine 6.6 qt with filter·6.0 qt without filter

2010 Toyota 4Runner Owner's Manual, PDF page 615

6.1 qt. (5.8 L, 5.1 Imp. qt.)Open the manual at this page ↗Added Oct 24, 2026 · Updated
See where it's printed

Oil capacity (with filter) · 2.7 L 4-cylinder (2TR-FE) engine · PDF page 615

6.1 qt. (5.8 L, 5.1 Imp. qt.)

Oil capacity (without filter) · 2.7 L 4-cylinder (2TR-FE) engine · PDF page 615

5.4 qt. (5.1 L, 4.5 Imp. qt.)

Oil capacity (with filter) · 4.0 L V6 (1GR-FE) engine · PDF page 615

6.6 qt. (6.2 L, 5.5 Imp. qt.)

Oil capacity (without filter) · 4.0 L V6 (1GR-FE) engine · PDF page 615

6.0 qt. (5.7 L, 5.0 Imp. qt.)

Oil type SAE 0W-20 Details →

See every quote (4 values)

All versions

4 values
Applies toValueManual saysPage
2.7 L 4-cylinder (2TR-FE) engine 6.1 qtwith filter “6.1 qt. (5.8 L, 5.1 Imp. qt.)” PDF page 615 ↗
2.7 L 4-cylinder (2TR-FE) engine 5.4 qtwithout filter “5.4 qt. (5.1 L, 4.5 Imp. qt.)” PDF page 615 ↗
4.0 L V6 (1GR-FE) engine 6.6 qtwith filter “6.6 qt. (6.2 L, 5.5 Imp. qt.)” PDF page 615 ↗
4.0 L V6 (1GR-FE) engine 6.0 qtwithout filter “6.0 qt. (5.7 L, 5.0 Imp. qt.)” PDF page 615 ↗

Scroll the table to see the quote and page →

Check the level before you drive

  1. Park on level ground. Turn off the engine and follow the waiting period in your owner's manual.
  2. Pull, wipe, and reinsert the dipstick. Use a clean cloth, then push the dipstick all the way back in.
  3. Read the level between the marks. Pull it out again. The oil should sit between the upper and lower marks.
  4. Top up a little at a time, then recheck. Use the specified oil. Don't fill above the upper mark.

A quick level check, not a full oil-change guide. Follow your manual's procedure.

Confirm with your own manual, dipstick or door-jamb label.
Report a problem with this page →