2007 Toyota Corolla Oil Capacity
2007 Toyota Corolla oil capacity: 4.4 US qt with a filter change. From the owner's manual, PDF page 294.
4.4US qt
With filter · converted from 4.2 L
- Without filter4.2 US qt
2007 Toyota Corolla Owner's Manual, PDF page 294
4.2 (4.4, 3.7)Open the manual at this page ↗Added Oct 22, 2026 · Updated
See where it's printed
Oil capacity (with filter) · All versions · PDF page 294
4.2 (4.4, 3.7)
Oil capacity (without filter) · All versions · PDF page 294
4.0 (4.2, 3.5)
Oil type SAE 5W−30 Details →
See every quote (2 values)
As printed in the manual
| Applies to | Value | Manual says | Page |
|---|---|---|---|
| All versions | 4.4 US qtwith filter · converted from 4.2 L | “4.2 (4.4, 3.7)” | PDF page 294 ↗ |
| All versions | 4.2 US qtwithout filter · converted from 4.0 L | “4.0 (4.2, 3.5)” | PDF page 294 ↗ |
Scroll the table to see the quote and page →
Check the level before you drive
- Park on level ground. Turn off the engine and follow the waiting period in your owner's manual.
- Pull, wipe, and reinsert the dipstick. Use a clean cloth, then push the dipstick all the way back in.
- Read the level between the marks. Pull it out again. The oil should sit between the upper and lower marks.
- Top up a little at a time, then recheck. Use the specified oil. Don't fill above the upper mark.
A quick level check, not a full oil-change guide. Follow your manual's procedure.
Confirm with your own manual, dipstick or door-jamb label.
Report a problem with this page →