CAR SPEC SHEET

2010 Toyota Corolla Oil Capacity

2010 Toyota Corolla oil capacity: 4.4 qt (1.8 L 4-cylinder (2ZR-FE) engine) or 4.0 qt (2.4 L 4-cylinder (2AZ-FE) engine) with filter.

Change year

Depends on your engine. Choose yours, or compare them here.

  • 1.8 L 4-cylinder (2ZR-FE) engine 4.4 qt with filter·4.1 qt without filter
  • 2.4 L 4-cylinder (2AZ-FE) engine 4.0 qt with filter·3.8 qt without filter

2010 Toyota Corolla Owner's Manual, PDF page 430

4.4 qt. (4.2 L, 3.7 Imp. qt.)Open the manual at this page ↗Added Oct 22, 2026 · Updated
See where it's printed

Oil capacity (with filter) · 1.8 L 4-cylinder (2ZR-FE) engine · PDF page 430

4.4 qt. (4.2 L, 3.7 Imp. qt.)

Oil capacity (without filter) · 1.8 L 4-cylinder (2ZR-FE) engine · PDF page 430

4.1 qt. (3.9 L, 3.4 Imp. qt.)

Oil capacity (with filter) · 2.4 L 4-cylinder (2AZ-FE) engine · PDF page 430

4.0 qt. (3.8 L, 3.3 Imp. qt.)

Oil capacity (without filter) · 2.4 L 4-cylinder (2AZ-FE) engine · PDF page 430

3.8 qt. (3.6 L, 3.2 Imp. qt.)

Oil type 0W-20 / 5W-20 Which one is yours →

See every quote (4 values)

All versions

4 values
Applies toValueManual saysPage
1.8 L 4-cylinder (2ZR-FE) engine 4.4 qtwith filter “4.4 qt. (4.2 L, 3.7 Imp. qt.)” PDF page 430 ↗
1.8 L 4-cylinder (2ZR-FE) engine 4.1 qtwithout filter “4.1 qt. (3.9 L, 3.4 Imp. qt.)” PDF page 430 ↗
2.4 L 4-cylinder (2AZ-FE) engine 4.0 qtwith filter “4.0 qt. (3.8 L, 3.3 Imp. qt.)” PDF page 430 ↗
2.4 L 4-cylinder (2AZ-FE) engine 3.8 qtwithout filter “3.8 qt. (3.6 L, 3.2 Imp. qt.)” PDF page 430 ↗

Scroll the table to see the quote and page →

Get the right part

Matches your manual0W-20 full synthetic motor oil
Shop on Amazon
Matches your manual5W-20 full synthetic motor oil
Shop on Amazon

Search links. Check the listing matches your vehicle and version. As an Amazon Associate we earn from qualifying purchases.

Check the level before you drive

  1. Park on level ground. Turn off the engine and follow the waiting period in your owner's manual.
  2. Pull, wipe, and reinsert the dipstick. Use a clean cloth, then push the dipstick all the way back in.
  3. Read the level between the marks. Pull it out again. The oil should sit between the upper and lower marks.
  4. Top up a little at a time, then recheck. Use the specified oil. Don't fill above the upper mark.

A quick level check, not a full oil-change guide. Follow your manual's procedure.

Confirm with your own manual, dipstick or door-jamb label.
Report a problem with this page →