2013 Toyota Sienna Oil Capacity
2013 Toyota Sienna oil capacity: 4.6 qt (1AR-FE engine) or 6.4 qt (2GR-FE engine) with filter. Oil type: 0W-20. From the owner's manual, PDF page 804.
Depends on your engine. Choose yours, or compare them here.
- 1AR-FE engine 4.6 qt with filter·4.2 qt without filter
- 2GR-FE engine 6.4 qt with filter·6.0 qt without filter
4.6qt
With filter · 1AR-FE engine
- Without filter4.2 qt
6.4qt
With filter · 2GR-FE engine
- Without filter6.0 qt
2013 Toyota Sienna Owner's Manual, PDF page 804
With filter: 4.6 qt. (4.4 L, 3.9 Imp.qt.)Open the manual at this page ↗Added Oct 24, 2026 · Updated
See where it's printed
Oil capacity (with filter) · 1AR-FE engine · PDF page 804
With filter: 4.6 qt. (4.4 L, 3.9 Imp.qt.)
Oil capacity (without filter) · 1AR-FE engine · PDF page 804
Without filter: 4.2 qt. (4.0 L, 3.5 Imp.qt.)
Oil capacity (with filter) · 2GR-FE engine · PDF page 804
With filter: 6.4 qt. (6.1 L, 5.4 Imp.qt.)
Oil capacity (without filter) · 2GR-FE engine · PDF page 804
Without filter: 6.0 qt. (5.7 L, 5.0 Imp.qt.)
2013 Toyota Sienna Owner's Manual, PDF page 804
With filter: 4.6 qt. (4.4 L, 3.9 Imp.qt.)Open the manual at this page ↗Added Oct 24, 2026 · Updated
See where it's printed
Oil capacity (with filter) · 1AR-FE engine · PDF page 804
With filter: 4.6 qt. (4.4 L, 3.9 Imp.qt.)
Oil capacity (without filter) · 1AR-FE engine · PDF page 804
Without filter: 4.2 qt. (4.0 L, 3.5 Imp.qt.)
2013 Toyota Sienna Owner's Manual, PDF page 804
With filter: 6.4 qt. (6.1 L, 5.4 Imp.qt.)Open the manual at this page ↗Added Oct 24, 2026 · Updated
See where it's printed
Oil capacity (with filter) · 2GR-FE engine · PDF page 804
With filter: 6.4 qt. (6.1 L, 5.4 Imp.qt.)
Oil capacity (without filter) · 2GR-FE engine · PDF page 804
Without filter: 6.0 qt. (5.7 L, 5.0 Imp.qt.)
Oil type 0W-20 Details →
See every quote (4 values)
All versions
| Applies to | Value | Manual says | Page |
|---|---|---|---|
| 1AR-FE engine | 4.6 qtwith filter | “With filter: 4.6 qt. (4.4 L, 3.9 Imp.qt.)” | PDF page 804 ↗ |
| 1AR-FE engine | 4.2 qtwithout filter | “Without filter: 4.2 qt. (4.0 L, 3.5 Imp.qt.)” | PDF page 804 ↗ |
| 2GR-FE engine | 6.4 qtwith filter | “With filter: 6.4 qt. (6.1 L, 5.4 Imp.qt.)” | PDF page 804 ↗ |
| 2GR-FE engine | 6.0 qtwithout filter | “Without filter: 6.0 qt. (5.7 L, 5.0 Imp.qt.)” | PDF page 804 ↗ |
Scroll the table to see the quote and page →
Get the right part
Search links. Check the listing matches your vehicle and version. As an Amazon Associate we earn from qualifying purchases.
Check the level before you drive
- Park on level ground. Turn off the engine and follow the waiting period in your owner's manual.
- Pull, wipe, and reinsert the dipstick. Use a clean cloth, then push the dipstick all the way back in.
- Read the level between the marks. Pull it out again. The oil should sit between the upper and lower marks.
- Top up a little at a time, then recheck. Use the specified oil. Don't fill above the upper mark.
A quick level check, not a full oil-change guide. Follow your manual's procedure.
Confirm with your own manual, dipstick or door-jamb label.
Report a problem with this page →