2006 Toyota Sienna Oil Capacity
2006 Toyota Sienna oil capacity: 5.0 US qt with a filter change (3MZ-FE). From the owner's manual, PDF page 506.
5.0US qt
With filter · 3MZ-FE · converted from 4.7 L
- Without filter4.8 US qt
2006 Toyota Sienna Owner's Manual, PDF page 506
4.7 (5.0, 4.1)Open the manual at this page ↗Added Oct 24, 2026 · Updated
See where it's printed
Oil capacity (with filter) · 3MZ-FE · PDF page 506
4.7 (5.0, 4.1)
Oil capacity (without filter) · 3MZ-FE · PDF page 506
4.5 (4.8, 4.0)
Oil type ILSAC multigrade engine oil Details →
See every quote (2 values)
As printed in the manual
| Applies to | Value | Manual says | Page |
|---|---|---|---|
| 3MZ-FE | 5.0 US qtwith filter · converted from 4.7 L | “4.7 (5.0, 4.1)” | PDF page 506 ↗ |
| 3MZ-FE | 4.8 US qtwithout filter · converted from 4.5 L | “4.5 (4.8, 4.0)” | PDF page 506 ↗ |
Scroll the table to see the quote and page →
Check the level before you drive
- Park on level ground. Turn off the engine and follow the waiting period in your owner's manual.
- Pull, wipe, and reinsert the dipstick. Use a clean cloth, then push the dipstick all the way back in.
- Read the level between the marks. Pull it out again. The oil should sit between the upper and lower marks.
- Top up a little at a time, then recheck. Use the specified oil. Don't fill above the upper mark.
A quick level check, not a full oil-change guide. Follow your manual's procedure.
Confirm with your own manual, dipstick or door-jamb label.
Report a problem with this page →