2019 Toyota Sienna Oil Capacity

2019 Toyota Sienna oil capacity: 5.8 qt (Vehicles with towing package) or 5.7 qt (Vehicles without towing package) with filter. Oil type: 0W-20.

Depends on your engine. Choose yours, or compare them here.

  • Vehicles with towing package 5.8 qt with filter
  • Vehicles without towing package 5.7 qt with filter
  • 3.5L 2GR-FKS 5.6 qt without filter

2019 Toyota Sienna Owner's Manual, PDF page 518

5.8 qt. (5.5 L, 4.8 Imp.qt.)Open the manual at this page ↗Added Oct 24, 2026 · Updated
See where it's printed

Oil capacity (with filter) · Vehicles with towing package · PDF page 518

5.8 qt. (5.5 L, 4.8 Imp.qt.)

Oil capacity (with filter) · Vehicles without towing package · PDF page 518

5.7 qt. (5.4 L, 4.8 Imp.qt.)

Oil capacity (without filter) · 3.5L 2GR-FKS · PDF page 518

5.6 qt. (5.3 L, 4.7 Imp.qt.)

Oil type SAE 0W-20 Details →

See every quote (3 values)

All versions

3 values
Applies toValueManual saysPage
Vehicles with towing package 5.8 qtwith filter “5.8 qt. (5.5 L, 4.8 Imp.qt.)” PDF page 518 ↗
Vehicles without towing package 5.7 qtwith filter “5.7 qt. (5.4 L, 4.8 Imp.qt.)” PDF page 518 ↗
3.5L 2GR-FKS 5.6 qtwithout filter “5.6 qt. (5.3 L, 4.7 Imp.qt.)” PDF page 518 ↗

Scroll the table to see the quote and page →

Check the level before you drive

  1. Park on level ground. Turn off the engine and follow the waiting period in your owner's manual.
  2. Pull, wipe, and reinsert the dipstick. Use a clean cloth, then push the dipstick all the way back in.
  3. Read the level between the marks. Pull it out again. The oil should sit between the upper and lower marks.
  4. Top up a little at a time, then recheck. Use the specified oil. Don't fill above the upper mark.

A quick level check, not a full oil-change guide. Follow your manual's procedure.

Confirm with your own manual, dipstick or door-jamb label.
Report a problem with this page →