2021 GMC Sierra Denali 2500HD/3500HD Oil capacity

2020 GMC Sierra Denali 2500HD/3500HD, representative photo
Shown: a 2020 GMC Sierra Denali 2500HD/3500HD (same generation). Photo: Kevauto, CC BY-SA 4.0
Change year

8.0qt

With filter · all (gas engine)

2021 GMC Sierra Denali 2500HD/3500HD Owner's Manual, PDF page 405

Engine Oil with Filter 7.6 L 8.0 qtOpen the manual at this page ↗Added Oct 15, 2026
See where it's printed

Oil capacity (with filter) · All (gas engine) · PDF page 405

Engine Oil with Filter 7.6 L 8.0 qt

2020 GMC Sierra Denali 2500HD/3500HD, representative photo
Shown: a 2020 GMC Sierra Denali 2500HD/3500HD (same generation). Photo: Kevauto, CC BY-SA 4.0
See every quote (1 value)

As printed in the manual

1 value
Applies toValueManual saysPage
All (gas engine) 8.0 qtwith filter “Engine Oil with Filter 7.6 L 8.0 qt” PDF page 405 ↗

Scroll the table to see the quote and page →

Check the level before you drive

  1. Park on level ground. Turn off the engine and follow the waiting period in your owner's manual.
  2. Pull, wipe, and reinsert the dipstick. Use a clean cloth, then push the dipstick all the way back in.
  3. Read the level between the marks. Pull it out again. The oil should sit between the upper and lower marks.
  4. Top up a little at a time, then recheck. Use the specified oil. Don't fill above the upper mark.

A quick level check, not a full oil-change guide. Follow your manual's procedure.

Confirm with your own manual, dipstick or door-jamb label.
Report a problem with this page →