2020 Honda Accord Hybrid Oil capacity
4.0US qt
With filter
- Without filter3.7 US qt
2020 Honda Accord Hybrid Owner's Manual, PDF pages 588 and 667
Engine oil change capacity (including filter): 4.0 US qt (3.8 L)Open the manual at this page ↗Added Oct 15, 2026
See where it's printed
Oil capacity (with filter) · All versions · PDF page 588
Engine oil change capacity (including filter): 4.0 US qt (3.8 L)
Oil capacity (without filter) · All versions · PDF page 667
Change 3.7 US qt (3.5 L)
See every quote (2 values)
As printed in the manual
| Applies to | Value | Manual says | Page |
|---|---|---|---|
| All versions | 4.0 US qtwith filter | “Engine oil change capacity (including filter): 4.0 US qt (3.8 L)” | PDF page 588 ↗ |
| All versions | 3.7 US qtwithout filter | “Change 3.7 US qt (3.5 L)” | PDF page 667 ↗ |
Scroll the table to see the quote and page →
0W-20 full synthetic motor oil
Shop on Amazon Matches the spec above
Honda 0W-20 motor oil
Shop on Amazon Matches the spec above
Search links. Check the listing matches your version.
Check the level before you drive
- Park on level ground. Turn off the engine and follow the waiting period in your owner's manual.
- Pull, wipe, and reinsert the dipstick. Use a clean cloth, then push the dipstick all the way back in.
- Read the level between the marks. Pull it out again. The oil should sit between the upper and lower marks.
- Top up a little at a time, then recheck. Use the specified oil. Don't fill above the upper mark.
A quick level check, not a full oil-change guide. Follow your manual's procedure.
Confirm with your own manual, dipstick or door-jamb label.
Report a problem with this page →