2025 Hyundai Santa Fe Hybrid Lug Nut Torque
2025 Hyundai Santa Fe Hybrid lug nut torque: 79-94 lb-ft. From the owner's manual, PDF page 640.
79-94lb-ft
2025 Hyundai Santa Fe Hybrid Owner's Manual, PDF page 640
tighten the wheel nut to 79-94 lbf·ft (11-13 kgf·m)Open the manual at this page ↗Added Oct 16, 2026 · Updated
See where it's printed
Lug nut torque · All versions · PDF page 640
tighten the wheel nut to 79-94 lbf·ft (11-13 kgf·m)
See every quote (1 value)
As printed in the manual
| Applies to | Value | Manual says | Page |
|---|---|---|---|
| All versions | 79-94 lb-ft | “tighten the wheel nut to 79-94 lbf·ft (11-13 kgf·m)” | PDF page 640 ↗ |
Scroll the table to see the quote and page →
Tools for this job
Tool for this jobTorque wrench (1/2-inch drive)
Shop on Amazon Search links. Check the listing matches your vehicle and version. As an Amazon Associate we earn from qualifying purchases.
Tightening wheel nuts
- Snug every nut by hand first. With the wheel still lifted, thread each nut on evenly.
- Lower the car and torque in a star pattern. Use a torque wrench set to the value above, working across the wheel.
- Recheck after a short drive. Your manual may give a re-torque interval.
Impact guns can over-tighten nuts. Finish with a torque wrench.
Confirm with your own manual, dipstick or door-jamb label.
Report a problem with this page →