2010 Lexus IS F Oil Capacity
2010 Lexus IS F oil capacity: 9.8 qt with a filter change. Oil type: 5W-30. From the owner's manual, PDF page 496.
9.8qt
With filter
- Without filter8.7 qt
2010 Lexus IS F Owner's Manual, PDF page 496
9.8 qt. (9.3 L, 8.2 Imp. qt.)Open the manual at this page ↗Added Oct 23, 2026 · Updated
See where it's printed
Oil capacity (with filter) · All versions · PDF page 496
9.8 qt. (9.3 L, 8.2 Imp. qt.)
Oil capacity (without filter) · All versions · PDF page 496
8.7 qt. (8.2 L, 7.2 Imp. qt.)
Oil type SAE 5W-30 Details →
See every quote (2 values)
As printed in the manual
| Applies to | Value | Manual says | Page |
|---|---|---|---|
| All versions | 9.8 qtwith filter | “9.8 qt. (9.3 L, 8.2 Imp. qt.)” | PDF page 496 ↗ |
| All versions | 8.7 qtwithout filter | “8.7 qt. (8.2 L, 7.2 Imp. qt.)” | PDF page 496 ↗ |
Scroll the table to see the quote and page →
Check the level before you drive
- Park on level ground. Turn off the engine and follow the waiting period in your owner's manual.
- Pull, wipe, and reinsert the dipstick. Use a clean cloth, then push the dipstick all the way back in.
- Read the level between the marks. Pull it out again. The oil should sit between the upper and lower marks.
- Top up a little at a time, then recheck. Use the specified oil. Don't fill above the upper mark.
A quick level check, not a full oil-change guide. Follow your manual's procedure.
Confirm with your own manual, dipstick or door-jamb label.
Report a problem with this page →