2020 Lexus LC Oil Capacity

2020 Lexus LC oil capacity: 9.1 qt (LC500) or 6.0 qt (LC500h) with filter. From the owner's manual, PDF page 378.

Depends on your engine. Choose yours, or compare them here.

  • LC500 9.1 qt with filter
  • LC500h 6.0 qt with filter·5.8 qt without filter

2020 Lexus LC Owner's Manual, PDF pages 378 and 379

With filter 9.1 qt. (8.6 L, 7.6 Imp.qt.)Open the manual at this page ↗Added Oct 23, 2026 · Updated
See where it's printed

Oil capacity (with filter) · LC500 · PDF page 378

With filter 9.1 qt. (8.6 L, 7.6 Imp.qt.)

Oil capacity (with filter) · LC500h · PDF page 379

With filter 6.0 qt. (5.7 L, 5.0 Imp.qt.)

Oil capacity (without filter) · LC500h · PDF page 379

Without filter 5.8 qt. (5.5 L, 4.8 Imp.qt.)

Oil type SAE 5W-30 / SAE 0W-20 Which one is yours →

See every quote (3 values)

All versions

3 values
Applies toValueManual saysPage
LC500 9.1 qtwith filter “With filter 9.1 qt. (8.6 L, 7.6 Imp.qt.)” PDF page 378 ↗
LC500h 6.0 qtwith filter “With filter 6.0 qt. (5.7 L, 5.0 Imp.qt.)” PDF page 379 ↗
LC500h 5.8 qtwithout filter “Without filter 5.8 qt. (5.5 L, 4.8 Imp.qt.)” PDF page 379 ↗

Scroll the table to see the quote and page →

Check the level before you drive

  1. Park on level ground. Turn off the engine and follow the waiting period in your owner's manual.
  2. Pull, wipe, and reinsert the dipstick. Use a clean cloth, then push the dipstick all the way back in.
  3. Read the level between the marks. Pull it out again. The oil should sit between the upper and lower marks.
  4. Top up a little at a time, then recheck. Use the specified oil. Don't fill above the upper mark.

A quick level check, not a full oil-change guide. Follow your manual's procedure.

Confirm with your own manual, dipstick or door-jamb label.
Report a problem with this page →