CAR SPEC SHEET

2010 Lexus LS Oil Capacity

2010 Lexus LS oil capacity: 9.1 qt (2WD models) or 9.5 qt (AWD models) with filter. From the owner's manual, PDF page 751.

Change year

Depends on your engine. Choose yours, or compare them here.

  • 2WD models 9.1 qt with filter·8.9 qt without filter
  • AWD models 9.5 qt with filter·8.9 qt without filter

2010 Lexus LS Owner's Manual, PDF page 751

9.1 qt. (8.6 L, 7.6 Imp. qt.)Open the manual at this page ↗Added Oct 23, 2026 · Updated
See where it's printed

Oil capacity (with filter) · 2WD models · PDF page 751

9.1 qt. (8.6 L, 7.6 Imp. qt.)

Oil capacity (without filter) · All versions · PDF page 751

8.9 qt. (8.4 L, 7.4 Imp. qt.)

Oil capacity (with filter) · AWD models · PDF page 751

9.5 qt. (9.0 L, 7.9 Imp. qt.)

Oil capacity (without filter) · All versions · PDF page 751

8.9 qt. (8.4 L, 7.4 Imp. qt.)

Oil type SAE 5W-20 or 0W-20 Details →

See every quote (3 values)

All versions

3 values
Applies toValueManual saysPage
2WD models 9.1 qtwith filter “9.1 qt. (8.6 L, 7.6 Imp. qt.)” PDF page 751 ↗
AWD models 9.5 qtwith filter “9.5 qt. (9.0 L, 7.9 Imp. qt.)” PDF page 751 ↗
All versions 8.9 qtwithout filter “8.9 qt. (8.4 L, 7.4 Imp. qt.)” PDF page 751 ↗

Scroll the table to see the quote and page →

Check the level before you drive

  1. Park on level ground. Turn off the engine and follow the waiting period in your owner's manual.
  2. Pull, wipe, and reinsert the dipstick. Use a clean cloth, then push the dipstick all the way back in.
  3. Read the level between the marks. Pull it out again. The oil should sit between the upper and lower marks.
  4. Top up a little at a time, then recheck. Use the specified oil. Don't fill above the upper mark.

A quick level check, not a full oil-change guide. Follow your manual's procedure.

Confirm with your own manual, dipstick or door-jamb label.
Report a problem with this page →