2010 Lexus RX Oil Capacity
2010 Lexus RX oil capacity: 6.4 qt with a filter change. From the owner's manual, PDF page 587.
6.4qt
With filter
- Without filter6.0 qt
2010 Lexus RX Owner's Manual, PDF page 587
6.4 qt. (6.1 L, 5.3 Imp. qt.)Open the manual at this page ↗Added Oct 23, 2026 · Updated
See where it's printed
Oil capacity (with filter) · All versions · PDF page 587
6.4 qt. (6.1 L, 5.3 Imp. qt.)
Oil capacity (without filter) · All versions · PDF page 587
6.0 qt. (5.7 L, 5.0 Imp. qt.)
Oil type ILSAC multi-grade engine oil / 0W-20 Which one is yours →
See every quote (2 values)
As printed in the manual
| Applies to | Value | Manual says | Page |
|---|---|---|---|
| All versions | 6.4 qtwith filter | “6.4 qt. (6.1 L, 5.3 Imp. qt.)” | PDF page 587 ↗ |
| All versions | 6.0 qtwithout filter | “6.0 qt. (5.7 L, 5.0 Imp. qt.)” | PDF page 587 ↗ |
Scroll the table to see the quote and page →
Get the right part
Matches your manual0W-20 full synthetic motor oil
Shop on Amazon Matches your manualLexus 0W-20 motor oil
Shop on Amazon Search links. Check the listing matches your vehicle and version. As an Amazon Associate we earn from qualifying purchases.
Check the level before you drive
- Park on level ground. Turn off the engine and follow the waiting period in your owner's manual.
- Pull, wipe, and reinsert the dipstick. Use a clean cloth, then push the dipstick all the way back in.
- Read the level between the marks. Pull it out again. The oil should sit between the upper and lower marks.
- Top up a little at a time, then recheck. Use the specified oil. Don't fill above the upper mark.
A quick level check, not a full oil-change guide. Follow your manual's procedure.
Confirm with your own manual, dipstick or door-jamb label.
Report a problem with this page →