2011 Toyota Camry Oil Capacity

2011 Toyota Camry oil capacity: 4.7 qt (2.5 L 4-cylinder (2AR-FE) engine) or 6.4 qt (3.5 L V6 (2GR-FE) engine) with filter.

Depends on your engine. Choose yours, or compare them here.

  • 2.5 L 4-cylinder (2AR-FE) engine 4.7 qt with filter·4.2 qt without filter
  • 3.5 L V6 (2GR-FE) engine 6.4 qt with filter·6.0 qt without filter

2011 Toyota Camry Owner's Manual, PDF page 493

4.7 qt. (4.4 L, 3.9 Imp. qt.)Open the manual at this page ↗Added Oct 24, 2026 · Updated
See where it's printed

Oil capacity (with filter) · 2.5 L 4-cylinder (2AR-FE) engine · PDF page 493

4.7 qt. (4.4 L, 3.9 Imp. qt.)

Oil capacity (without filter) · 2.5 L 4-cylinder (2AR-FE) engine · PDF page 493

4.2 qt. (4.0 L, 3.5 Imp. qt.)

Oil capacity (with filter) · 3.5 L V6 (2GR-FE) engine · PDF page 493

6.4 qt. (6.1 L, 5.4 Imp. qt.)

Oil capacity (without filter) · 3.5 L V6 (2GR-FE) engine · PDF page 493

6.0 qt. (5.7 L, 5.0 Imp. qt.)

Oil type ILSAC multigrade engine oil / SAE 0W-20 / SAE 5W-30 Which one is yours →

See every quote (4 values)

All versions

4 values
Applies toValueManual saysPage
2.5 L 4-cylinder (2AR-FE) engine 4.7 qtwith filter “4.7 qt. (4.4 L, 3.9 Imp. qt.)” PDF page 493 ↗
2.5 L 4-cylinder (2AR-FE) engine 4.2 qtwithout filter “4.2 qt. (4.0 L, 3.5 Imp. qt.)” PDF page 493 ↗
3.5 L V6 (2GR-FE) engine 6.4 qtwith filter “6.4 qt. (6.1 L, 5.4 Imp. qt.)” PDF page 493 ↗
3.5 L V6 (2GR-FE) engine 6.0 qtwithout filter “6.0 qt. (5.7 L, 5.0 Imp. qt.)” PDF page 493 ↗

Scroll the table to see the quote and page →

Check the level before you drive

  1. Park on level ground. Turn off the engine and follow the waiting period in your owner's manual.
  2. Pull, wipe, and reinsert the dipstick. Use a clean cloth, then push the dipstick all the way back in.
  3. Read the level between the marks. Pull it out again. The oil should sit between the upper and lower marks.
  4. Top up a little at a time, then recheck. Use the specified oil. Don't fill above the upper mark.

A quick level check, not a full oil-change guide. Follow your manual's procedure.

Confirm with your own manual, dipstick or door-jamb label.
Report a problem with this page →