2007 Toyota Highlander Hybrid Oil Capacity
2007 Toyota Highlander Hybrid oil capacity: 5.0 qt with a filter change. Oil type: 5W-30. From the owner's manual, PDF page 424.
5.0qt
With filter
- Without filter4.8 qt
2007 Toyota Highlander Hybrid Owner's Manual, PDF page 424
With filter 4.7 (5.0, 4.1)Open the manual at this page ↗Added Oct 24, 2026 · Updated
See where it's printed
Oil capacity (with filter) · All versions · PDF page 424
With filter 4.7 (5.0, 4.1)
Oil capacity (without filter) · All versions · PDF page 424
Without filter 4.5 (4.8, 4.0)
Oil type 5W-30 Details →
See every quote (2 values)
As printed in the manual
| Applies to | Value | Manual says | Page |
|---|---|---|---|
| All versions | 5.0 qtwith filter | “With filter 4.7 (5.0, 4.1)” | PDF page 424 ↗ |
| All versions | 4.8 qtwithout filter | “Without filter 4.5 (4.8, 4.0)” | PDF page 424 ↗ |
Scroll the table to see the quote and page →
Get the right part
Matches your manual5W-30 full synthetic motor oil
Shop on Amazon Matches your manualToyota 5W-30 motor oil
Shop on Amazon Search links. Check the listing matches your vehicle and version. As an Amazon Associate we earn from qualifying purchases.
Check the level before you drive
- Park on level ground. Turn off the engine and follow the waiting period in your owner's manual.
- Pull, wipe, and reinsert the dipstick. Use a clean cloth, then push the dipstick all the way back in.
- Read the level between the marks. Pull it out again. The oil should sit between the upper and lower marks.
- Top up a little at a time, then recheck. Use the specified oil. Don't fill above the upper mark.
A quick level check, not a full oil-change guide. Follow your manual's procedure.
Confirm with your own manual, dipstick or door-jamb label.
Report a problem with this page →