CAR SPEC SHEET

2007 Toyota Tundra Lug Nut Torque

2007 Toyota Tundra lug nut torque: 154 ft·lbf (Steel wheels (also aluminum wheel nuts when used on temporary spare)) or 97 ft·lbf (Aluminum wheels).

Change year

Depends on your version. Choose yours, or compare them here.

  • Steel wheels (also aluminum wheel nuts when used on temporary spare) 154 ft·lbf
  • Aluminum wheels 97 ft·lbf

2007 Toyota Tundra Owner's Manual, PDF page 566

209 N·m (21.3 kgf·m, 154 ft·lbf)Open the manual at this page ↗Added Oct 24, 2026 · Updated
See where it's printed

Lug nut torque · Steel wheels (also aluminum wheel nuts when used on temporary spare) · PDF page 566

209 N·m (21.3 kgf·m, 154 ft·lbf)

Lug nut torque · Aluminum wheels · PDF page 566

131 N·m (13.4 kgf·m, 97 ft·lbf)

See every quote (2 values)

All versions

2 values
Applies toValueManual saysPage
Steel wheels (also aluminum wheel nuts when used on temporary spare) 154 ft·lbf “209 N·m (21.3 kgf·m, 154 ft·lbf)” PDF page 566 ↗
Aluminum wheels 97 ft·lbf “131 N·m (13.4 kgf·m, 97 ft·lbf)” PDF page 566 ↗

Scroll the table to see the quote and page →

Tools for this job

Tool for this jobTorque wrench (1/2-inch drive)
Shop on Amazon

Search links. Check the listing matches your vehicle and version. As an Amazon Associate we earn from qualifying purchases.

Tightening wheel nuts

  1. Snug every nut by hand first. With the wheel still lifted, thread each nut on evenly.
  2. Lower the car and torque in a star pattern. Use a torque wrench set to the value above, working across the wheel.
  3. Recheck after a short drive. Your manual may give a re-torque interval.

Impact guns can over-tighten nuts. Finish with a torque wrench.

Confirm with your own manual, dipstick or door-jamb label.
Report a problem with this page →